Hunter 320 Drilling Mud Cleaner High Capacity Flow Durable Drilling Mud

Mud cleaners use a two-stage separation process for enhanced drilling fluid recovery. This design enables our mud cleaners to handle the entire circulating volume and remove any dry solids while retaining premium base fluid, which is vital to drilling success.

Oil drilling mud solids control mud cleaner is a hot sale product at AIPU Solids Control. There are many different configurations. Such as cones quantity, bottom shaker, electrical system, and so on

Mud cleaner is a combination of shaker, desander cone, and desilter cone. We call it three in one, too. For the oil drilling mud process, desander cone is sized 8-12''. The desilter cone is 4'' or 5''. Different size cones hold different treating capacities. When we confirm the configuration or design of the mud cleaner, we should consider the general flow rate of all cones. For example, 4" cone capacity is about 20m³/h and we request a 320m³/h flow rate we need to configure 12 cones at least. To consider some heavy mud and large solids content we suggest 125% of rated capacity.

Cones on Hunter mud cleaner are all high-quality polyurethane. Such cones are durable and anti-corrosive, oil-resistant, high temperature-resistant. They are very suitable for the drilling fluids process. For some clients, they prefer flexible capacity adjustment during operation so we'll install ball valves on the cones inlet line.

Drilling mud is transferred to cones by a centrifugal pump from the shaker tank. Desander cone and desilter cone are fed by different pumps. This will provide better results. Under pump pressure, the fluids will run into cones and flow with centrifugal force. Then the heavy particles will deposit down and be pushed out of the cone drop in Apex.

After the mud cleaner processing, the solids larger than 15 microns will be separated out of drilling fluids. The drilling mud with solids sprays out of cones drop down to the bottom screen panel. Under vibration and filtration, the solids will be drier and save many fluids for well drilling. The cleaned mud is transferred to a centrifuge.

Some clients don't know the difference between desander and desilter. Actually, it's very easy to identify them. Bigger cone separate larger particles, smaller ones separate the finer particles. And fluids will be separated by desilter after being processed by desander.

Besides mud cleaner, the separated desander and desilter is another option for user. Please refer to information on desander and desilter for more reference. The bottom shaker under the mud cleaner cone is used to dry fluids out of the cone. So, the mesh size is rather high and the capacity is enough for discharge from the cone but not the same as the previous shaker

For more information, please don't hesitate to contact AIPU solids control. You will get an optimal solution, you will get a professional proposal in time.

Hunter 320 Mud Cleaner Drilling

360m³/H Drilling Mud Cleaning System

Linear Vibration Mud Cleaning Equipment

Hunter 320 Drilling Mud Cleaner Linear Vibration 360m³/H Flow Drilling Mud Images